How do I scan on Yaesu ft65?

How do I scan on Yaesu ft65?

To manually initiate VFO scanning, press and hold either the [▲] or [▼] key to begin upward or downward scanning, respectively. Programmed Mode VFO Scan: To begin scanning within a limited sub-band range from the VFO mode, press and hold the [#BAND] key to select the bandwidth for the Programmed Mode (VFO) scanner.

What is Mars Cap Mod?

MARS MOD IC-7100 Description Hide. MARS/CAP Modification. MARS is the Military Auxiliary Radio Service. They use HF and VHF frequencies near ham band to forward personal messages to/from military personnel. CAP is Civil Air Patrol.

What frequency is Mars cap?

The Mars Relay uses frequencies of 437.1 MHz for transmission, and 401.5 and 405.6 MHz for reception.

How do I power on the Yaesu VX-6R?

Image from page 1 of the Yaesu VX-6R Operating Manual. Power on the radio by pressing and holding the power button on the center left. The Unit will turn on and display the battery voltage.

How do I activate the CTCSS on my Yaesu VX-6R radio?

Image from page 22 of the Yaesu VX-6R Operating Manual. Rotate the dial on the top right of the radio until “TONE” appears on the display. This activates the CTCSS encoder for repeaters that require a tone. Image from page 12 of the Yaesu VX-6R Operating Manual.

How good is the Sony VX-6R?

Speaking of ragchewing, the VX-6R is made very practical for day to day use. The microphone has gain adjust, so you can fine-tune your audio input to compliment your voice’s natural volume level. As well, FOUR power output settings are available, all the way down to .3 Watts on 2 meter/70cm and .2 Watts on 1.25cm!

Is the Yaesu VX-6R the heartiest of handhelds?

Yaesu VX-6R: The Heartiest of Handhelds – ARTech. Every once in a while you come across something that just ‘works’. The way it fits in your hand, the way it looks and feels, the user-interface–some products simply check all the right boxes. The Yaesu VX-6R is one of those products for me.