What does OSHA consider a tripping hazard?
Anything in a walking path that could catch a foot or cause a loss of traction is a potential slip or trip hazard. Cables across walkways, paper on the floor, boxes, or hoses can all cause a dangerous accident.
What is the OSHA standard for dealing with slip and fall protection?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
What is considered a tripping hazard?
The Americans with Disabilities Act (ADA) of 1990 defines a ‘trip hazard’ as any vertical change of over 1/4 inch or more at any joint or crack. Since the ADA demands strict compliance, trip hazards represent a legal liability to your potential prospects.
What are the 3 causes of slips trips and falls Select all that apply?
There are three physical factors involved in slips, trips, and falls: friction, momentum, and gravity. Each one plays a role.
What is the leading cause of slips trips and falls OSHA?
Loss of traction is the leading cause of workplace slips. hazards like ice or snow. Slips are more likely to occur when you hurry or run, wear the wrong kind of shoes, or don’t pay attention to where you’re walking. a hurry and don’t pay attention to where you’re going.
Which three of the following are slip hazards?
What are the three main causes of slips trips and falls?
Common causes of slips, trips, and falls
- inappropriate floor surface – e.g. smooth, shiny tiles in a wet area.
- slippery floor surfaces – e.g. oily, icy, wet or dusty.
- poor housekeeping – e.g. spills not cleaned up immediately.
- inappropriate or sudden changes in floor surfaces.
What type of hazard is slips and falls?
Slips, trips, and falls put workers at risk of sprains, strains, bruises, concussions, and fractures. Falls often result from slipping or tripping.
What is the best way to prevent a slip hazard?
You can reduce the risk of tripping by: keeping walking areas clear from clutter or obstructions. keeping flooring in good condition. always using installed light sources that provide sufficient light for your tasks. using a flashlight if you enter a dark room where there is no light.