What does EP3 rev to?
Comparing that to the standard EP3 Type R which has the rev limit set to around the 8000 RPM mark, with VTEC engaging at around 6000.
Why do sports cars have soft limiters?
Soft limiters cut the fuel, but do it more gradually, decreasing the engine’s juice supply so it runs increasingly lean, slowing and ultimately halting the engine’s acceleration. These normally set the maximum revs lower while the car is stationary, for example, or while the engine is still in a warm-up phase.
What is the fastest RPM ever achieved in a car?
Highest-revving car engines ever made
- McLaren 570S – 8,500rpm.
- Audi R8 V10 – 8,700rpm.
- Ferrari F12tdf – 8,900rpm.
- Ferrari 458 – 9,000rpm.
- Lexus LFA – 9,000rpm.
- Porsche 911 (991) GT3 – 9,000rpm.
- Porsche 918 Spyder – 9,150rpm.
- Ferrari LaFerrari – 9,250rpm.
Why do Honda engines rev high?
First you want to figure out why an automaker might want one of its engines to rev so high. The answer is typically for power purposes. As torque remains fairly consistent across a given powerband, horsepower will rise as the revs do. So when an engine can rev higher then it will also make more power.
What is a soft cut rev limiter?
Soft-cut limiters are a type of rev limiter that partially cuts off fuel to the engine. These limiters may also retard the ignition timing. If using a soft-cut rev limiter, the engine will start to cut fuel or retard ignition timing before the set RPM until it slowly reaches it and remains there.
Can you remove rev limiter?
How to remove the RPM limiter? This electronic command module which limits the RPM quantity in order to save your engine from being damaged cannot be physically removed. However, you have the possibility to change the ECU stock with a high performance ECU. This process will authorize you to go beyond the RPM limits.
What Honda engine revs the highest?
Honda S2000
Honda S2000 – 8,900rpm.
What is the rev limiter on a 4 stroke?
They confirmed that their 4 strokes have a rev limiter that kicks in over 6200 RPM. Too bad it’s not adjustable. Thanks guys….after talking to several Mercury dealer service departments with no clear answer I came across the national Mercury engine hot-line. They confirmed that their 4 strokes have a rev limiter that kicks in over 6200 RPM.
Does the ECM have a rev limiter function?
I have a 2006 90HP 4Stroke and the ECM has a rev limiter function. It does it by disabling some of the injectors at 6200RPM and above. My engine is the Yamaha head. I have an OEM Mercury Service manual.
What rpm should I Set my rev limiter to?
Would be great to have a programmable rev-limiter and set it to 4000 RPM when they use it. just limit the max. throttle travel….. You must log in or register to reply here.