Who makes Miller HVAC units?
Miller manufactures a full line of furnaces, air conditioners, heat pumps and packaged systems for manufactured homes. Miller is owned by Nortek Global HVAC, a subsidiary of Nortek, Inc. Nortek Global HVAC had net sales of approximately $642 million in 2017.
How much does an air handler unit cost?
An air handler costs $500 to $3,500, with most homeowners paying $700 to $1,500. This does not include installation, which averages $1,500 and ranges $200 to $2,100.
How long do indoor air handlers last?
15 to 25 years
In general, most HVAC systems will last from 15 to 25 years, but depending on the type of system and other contributing factors, that estimate can be highly variable.
How long does a Miller furnace last?
16 to 20 years
The average lifespan of furnace is 16 to 20 years. The first thing to find out is the age of your current furnace.
How old is my Miller furnace?
How can I tell the age of a Miller air conditioner or furnace from the serial number? Miller is one the brands manufactured by Nordyne/Nortek, and follows their serial number format. The fourth and fifth digits of the serial number are the year of manufacture.
Where is the filter on a Miller furnace?
Your current filter will be located in between your cold air return duct and your unit’s blower motor. If you have trouble finding it, simply follow your return air duct down to where it meets with your furnace. When you’ve located it, slide it out of your unit. 4.
How much does a 2.5 ton air handler cost?
Air handler prices
| Home size (SF) | Tons | Average unit price |
|---|---|---|
| 600 – 900 | 1.5 ton | $600 – $800 |
| 1,000 – 1,200 | 2 ton | $700 – $1,200 |
| 1,300 – 1,500 | 2.5 ton | $800 – $1,400 |
| 1,600 – 1,800 | 3 ton | $900 – $1,500 |
Does air handler need to be replaced?
Unfortunately, the short answer is yes. You should replace your indoor air handler at the same time as your outdoor heat pump — or air conditioning unit if it’s that time of year.
How do you read a Miller serial number?
The first one or two digits of your Serial Number can identify what year your Miller product was manufactured – see example and the chart below. Example: A product displaying the Serial Number W-117683 was manufactured in 1970. A product displaying the Serial Number JC122376 was manufactured in 1982.
How can you tell how old an HVAC unit is?
Check the upper-right hand corner of the nameplate for the unit’s manufacture date. If the manufacture date is not visible on the condenser, you can always locate the brand, model and serial number on the plate, which will help to determine the age of the unit.
How often should I change my furnace air filter?
In general, this is how often changing furnace filters needs to be done:
- For 1- to 2-inch filters, replace them every 1 to 3 months.
- For 3- to 4-inch filters, replace them every 6 to 9 months.
- For 5- to 6-inch filters, replace them every 9 to 12 months.
What size filter does a Miller furnace use?
Products specifications
| OEM Product | Yes |
|---|---|
| Filter Size | Other |
| Choose Size | 19×54 |
| Model Number | 1301954 |
How much does replacing an air handler cost?
An air handler costs $1,500 to $3,400 to replace on average, depending on the ton size, brand, and type. Air handler prices are $700 to $1,600 for the unit alone, plus $800 to $1,800 for replacement labor. Air handler fan coil units from top brands like Trane, Carrier, and Lennox cost the most.
How do I know if my air handler is bad?
A good sign something is wrong with your air handler is when the condensate pan is leaking. During the hot summers, hard-working AC units will create a lot of condensation that accumulates in the pan below the air handler. If algae or mold builds up in the lines, it can clog the drains.