Which three options are valid inter-VLAN routing methods?

Which three options are valid inter-VLAN routing methods?


Term Classify One physical interface for many VLANs Definition Subinterface
Term Which three options are valid inter-VLAN routing methods? Definition Traditional routing Router-on-a-stick Multilayer-switch-based routing

What is the method of routing between VLANs on a Layer 3 switch?

To provide inter-VLAN routing, Layer 3 switches use SVIs. SVIs are configured using the same interface vlan vlan-id command used to create the management SVI on a Layer 2 switch. A Layer 3 SVI must be created for each of the routable VLANs.

What is intra VLAN routing?

Inter-VLAN routing refers to the movement of packets across the network between hosts in different network segments. VLANs make it easier for one to segment a network, which in turn improves the performance of the network and makes it more flexible, since they are logical connections.

Which three statements are true about hosts that are configured in the same VLAN choose three?

Which Three Statements are true about hosts configured in the same VLAN? Hosts in the same VLAN must be on the same IP subnet. Hosts in the same VLAN share the same broadcast domain. Hosts in the same VLAN comply with the same security policy.

Which of the following could be used to provide a Layer 3 data path between separate VLANs?

Explanation : To transport packets between VLANs, you must use a Layer 3 device. Traditionally, this has been a router’s function.

What is inter-VLAN routing Mcq?

Q. What is Inter-VLAN Routing? The process of forwarding network traffic from one VLAN to another VLAN using routing. Subnetting networks to support users.

What is a valid VLAN type?

Data VLAN – Data VLAN is used to divide the whole network into 2 groups. One group of users and other group of devices. This VLAN also known as a user VLAN, the data VLAN is used only for user-generated data. This VLAN carrying data only. It is not used for carrying management traffic or voice.

What are the valid types of VLAN membership?

4.1 Types of VLAN’s. VLAN membership can be classified by port, MAC address, and protocol type. Membership in a VLAN can be defined based on the ports that belong to the VLAN. For example, in a bridge with four ports, ports 1, 2, and 4 belong to VLAN 1 and port 3 belongs to VLAN 2 (see Figure3).

Which of the following are benefits of VLANs choose three?

They increase the size of collision domains. They allow logical grouping of users by function. They can enhance network security. They increase the size of broadcast domains while decreasing the number of collision domains.

What are the valid ways to segment a LAN?

LAN segments are separated by a bridge, router, or a switch.

What are different VLAN modes?

The term VLAN stands for Virtual Local Area Network and every Ethernet port in an Optigo Connect system can be configured with one of three different VLAN modes: Access, Trunk, or Local. Typically, VLAN Access mode is used for ports connected to end devices (e.g. cameras, BAS controllers, etc).

Which of the following types of VLAN that carries all untagged traffic?

Recall that the native VLAN is the VLAN associated with untagged traffic.

What is a layer 3 VLAN?

The Layer 3 switching function needs a virtual interface connected to each VLAN internal to the switch. These VLAN interfaces act like router interfaces, with an IP address and mask. The Layer 3 switch has an IP routing table, with connected routes off each of these VLAN interfaces.

What are the Layer 3 protocols?

The protocols used in Layer 3 include:

  • Internet Protocols IPv4/v6.
  • Internet Control Message Protocol (ICMP)
  • Distance Vector Multicast Routing Protocol (DVMRP)
  • Internet Group Management Protocol (IGMP)
  • Address Resolution Protocol (ARP)
  • Internet Protocol Security (IPsec)
  • Routing Information Protocol (RIP)

What are the factors that must be considered to choose the type of LAN to implement?

You should consider four main factors when selecting a LAN technology:

  • Cost efficiency.
  • Installed base.
  • Maintainability.
  • Performance.

What type of switch is used for Inter VLAN routing?

The modern method of performing inter-VLAN routing is to use Layer 3 switches and switched virtual interfaces (SVI). An SVI is a virtual interface that is configured on a Layer 3 switch, as shown in Figure 4-4. A Layer 3 switch is also called a multilayer switch because it operates at Layer 2 and Layer 3.

What is the modern method of Performing Inter-VLAN routing?

The modern method of performing inter-VLAN routing is to use Layer 3 switches and switched virtual interfaces (SVI). An SVI is a virtual interface that is configured on a Layer 3 switch, as shown in Figure 4-4.

What is the difference between SVI and inter VLAN routing?

If a device in the sales department wants to communicate with a device in the finance department, inter VLAN routing has to be performed. These can be performed by either router or layer 3 switches. SVI is a logical interface on a multilayer switch that provides layer 3 processing for packets to all switch ports associated with that VLAN.

How do I configure inter VLAN?

Inter VLAN can be configured in three different ways: 1 Traditional Method 2 Router on stick 3 Inter VLAN in layer 3 switch More