Can you put switches and outlets on the same circuit?
In your case it is okay to install a receptacle alongside the switch. However you need a neutral as well as a hot wire which you may not have. Test to see if you have a neutral with a test light or meter. The neutral will be white but some switches are wired up with a white wire that is not a neutral.
How many outlets and lights can be on one circuit?
Technically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.
Can bathroom outlets and lights on same circuit?
No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles.
How do you wire a switch with multiple outlets?
Connect the black and red wires to the switch. The red becomes the switched-hot. Pass the switched-hot back to all the outlets via the red wires. At each outlet except the one furthest from the switch, connect the hot side of the outlet to the switched-hot via a red pigtail.
Does a bathroom outlet need to be on its own circuit?
A The main rule of Section 210-11(c)(3) requires a 20A circuit that is dedicated to bathroom receptacle outlets. It does not require a separate circuit for each bathroom. One circuit may supply multiple bathrooms as long as only bathroom receptacles are supplied.
What is code for electrical outlets in a bathroom?
The NEC requires that all outlet receptacles in a bathroom be GFCI protected. Outlet circuit must be 20 amps: The outlets in a bathroom should be served by a 20-amp circuit, separate from the lighting circuit, to provide power items such as curling irons, razors, and hairdryers.
Can I pull power from an outlet for a light switch?
Adding an electrical outlet next to an existing light switch is easy, as long as there is a neutral wire in the box. Step 1: Turn the power supply off to the light switch at the main electrical panel. Step 2: Remove the switch plate and unscrew the switch from the outlet box. Step 3: Pull the switch out from the box.
How do I control multiple outlets with one switch?
How Do I Use Switcheroo? Simply plug a Switcheroo into your switched outlet, and then another Switcheroo into as many outlets that you want to turn on and off with your existing switch. Set them to the same channel and you are done. Or, use different channels for multiple configurations around your house.