What engine comes in a Nissan 240SX?

What engine comes in a Nissan 240SX?

Most of the 240SX were equipped with the 2.4-liter inline 4 engine (KA24E from 1989 to 1990 and KA24DE from 1990 to 1998). The KA24E had a single overhead cam and KA24DE had dual overhead cams. Two distinct generations of the 240SX, the S13 (1989–1994) the S14 (1994-1998) were produced based on the Nissan S platform.

What cars have LS3 engines?

GM 6.2 Liter V8 Small Block LS3 Engine

Displacement: 6.2L / 376 cu. in.
Vehicles: Chevrolet Corvette, Corvette Grand Sport, Camaro SS ,SS, Pontiac G8 GXP
Introduced: 2007 model year
Discontinued:
Predecessor: LS6 / Gen 3 Small Block

What does LS3 mean?

LS3 Legged Squad Support System (legged robot) Governmental » Military Rate it:
LS3 General Motors LS3 6.2L V8 Miscellaneous » Automotive Rate it:

What engine is in the S14?

Nissan 200SX/Silvia S14 performance and specs

Model Nissan 200SX
Engine 1998cc 16 valve, turbocharged DOHC inline four-cylinder
Power 197bhp @ 6400rpm
Torque 195lb ft @ 4800rpm
Transmission Five-speed manual/four-speed auto

What cars have a LS3?

What do you need to know about a Nissan 240SX LS swap?

Our S13 and S14 Nissan 240SX LS Swap Systems are completely comprehensive, including engine mounts, transmission crossmembers, headers, and exhaust systems. All parts work in conjunction with one another to provide maximum ground clearance, optimized driveline angles, and a simple trouble free installation.

What kind of engine does a Datsun 240Z have?

Ever since Hooker developed their Datsun 240Z V8 swap kit for small block Chevy engines, they’ve been into lightweight, high horsepower applications. Holley and its team of engineers have developed a high quality, cost-effective line up of LS swap components & swap kits for the popular S13 and S14 Nissan 240SX chassis.

Is there a cheap way to stuff an LS into a 240?

There’s certainly a cheap way to stuff an LS into a 240 but that often comes with a lot of headache and constant failures. I’ve read people bragging an LS swap can be done for $2000, all I have to say is good luck!

Where to put the shifter on a 240SX?

The stock T56 shifter sits about 2-inches forward of the stock Nissan one and while it works, the 1st ,3rd , and 5th gear positions come extremely close to hitting the radio and dash trim so the solution is a MGW short shifter. It relocates the shaft just back far enough for perfect placement in the 240SX. As a bonus, you get a shorter throw.