What are the features of TM4C123GH6PM?
32-bit Arm Cortex-M4F based MCU with 80 -MHz, 256 -KB Flash, 32 -KB RAM, 2 CAN, RTC, USB, 64-Pin.
How many on chip ADC modules does Tiva C have?
two ADCs
Tiva C does have two ADCs.
What is Tiva and C series LaunchPad?
The TivaWare for Tiva™ C Series Software Kit provides all the components neccesary for engineers to evaluate and develop applications for the Texas Instruments TM4C ARM® Cortex®-M4F device family. The software kit provides libraries for each device peripheral with TI-developed, tested, and maintained API’s.
How many pins on each port can be set to GPIO?
32 pins
Pin configuration The GPIO port peripheral implements up to 32 pins, PIN0 through PIN31 . Each of these pins can be individually configured in the PIN_CNF[n] registers (n=0.. 31).
What is Tiva C microcontroller?
Tiva C Series TM4C123G LaunchPad Introduction The TM4C123G is a member of the class of high performance 32 bit ARM cortex M4 microcontroller with a broad set of peripherals developed by Texas Instrumentals. The TIVA launchpad has a built-in processor clock frequency of up to 80MHz with a floating-point unit (FPU).
What is role of PLL?
The main purpose of a PLL circuit is to synchronize an output oscillator signal with a reference signal. When the phase difference between the two signals is zero, the system is “locked.” A PLL is a closed-loop system with a control mechanism to reduce any phase error that may occur.
Which Tiva launchpad port pin does the PWM signal come from?
This PWM code generates a 1KHz PWM signal on the PF2 pin of TM4C123 Tiva C Launchpad.
How many GPIO ports are available in the msp432?
11 total
The MSP432P401R has the GPIO pins grouped in sets of 8 pins, called Ports. There are 11 total ports on the device: Ports 1-10 and Port J. The pins within the ports are labelled with numbers 0-7.
Can GPIO be analog or digital?
All 17 of its GPIO pins are digital. They can output high and low levels or read high and low levels. This is great for sensors that provide a digital input to the Pi but not so great if you want to use analogue sensors.
What is a tm4c123gh6pm?
TM4C123GH6PM data sheet, product information and support | TI.com TI’s TM4C123GH6PM is a 32-bit Arm Cortex-M4F based MCU with 80 -MHz, 256 -KB Flash, 32 -KB RAM, 2 CAN, RTC, USB, 64-Pin LQF. Find parameters, ordering and quality information
What is PE3 in TM4C123 microcontroller?
PE3 is a pin number three of PORTE of TM4C123 microcontroller. In this schematic diagram, we are using a variable resistor to provide variable voltage input signal to AN0. Connect the middle terminal of a potentiometer with PE3/AN0 and other two terminals with 3.3 volts and ground terminal respectively.
What is the tm4c123g Launchpad evaluation kit?
The TM4C123G LaunchPad Evaluation Kit is a low-cost evaluation platform for Arm Cortex-M4F based microcontrollers. Featuring a 80-MHz Arm Cortex-M4F CPU, 256kB of flash, and 32kB of SRAM, the TM4C123GH6PM MCU provides integrated USB 2.0 support for USB Host/Device/OTG and two 12-bit ADC modules. document-pdfAcrobatUser guide Out of stock on TI.com
How many ADC modules does TM4C123 microcontroller have?
As we mentioned earlier, TM4C123 microcontroller has two ADC modules that are ADC0 and ADC1. Each analog to digital converter has a separate sample sequencer (SS0, SS1, SS2 and SS3) which can sample different input channels.