How do I get out of OK prompt in Solaris?
Reaching the ok Prompt
- Graceful shutdown.
- Graceful reset of the control domain using the ILOM reset command.
- Manual system reset.
- The Break key or the equivalent ALOM system controller command pair: -> set /HOST send_break_action=break. -> start /SP/console -force.
How do I boot into failsafe mode in Solaris 10?
To boot an x86 based system in failsafe mode, select the failsafe boot entry when the GRUB menu is displayed during a system boot. During the failsafe boot procedure, when prompted by the system, type y to update the primary boot archive. Failsafe booting is also supported on systems that are booted from ZFS.
How do I get OK prompt in Solaris 10?
On a Sun keyboard, press the two keys STOP and A . That will get you an OK prompt.
How do I update boot archive in Solaris 11?
How to Manually Update the Boot Archive by Using the bootadm Command
- Become superuser or assume an equivalent role. Roles contain authorizations and privileged commands.
- To update the boot archive, type: # bootadm update-archive bootadm. Manages the boot archives on a system.
- Reboot the system. # reboot.
How do I change the boot device in Solaris 10?
SPARC: How to Change the Default Boot Device
- Become superuser.
- Halt the system by using the init(1M) command.
- If the > PROM prompt is displayed, type n and press Return.
- Change the boot-device setting by using the setenv command.
- Verify the default boot device change by using the printenv command.
How do I update boot archive in Solaris 10?
What is boot archive Solaris?
When you install Oracle Solaris, the bootadm command creates a boot archive on your system. A boot archive is a subset of a root file system. This boot archive contains all of the kernel modules, driver. conf files, in addition to a few configuration files. These files are located in the /etc directory.
How do I find my boot drive?
All replies. You can open up disk management with diskmgmt. msc and under the Status column look for the disk that has “Boot” in it.
How do I open advanced Command Prompt?
Open the folder in Windows Explorer and hold the Shift key while making a right-click on the folder. Then, select ‘Run command window here’ to open the CMD prompt. Click on the option and you’ll begin a new instance of the Command Prompt, ready and waiting at the right location!